Absima 12016 1:10 EP Crawler CR3.4 "SHERPA-PRO" Metallic red RTR

The CR3.4 SHERPA PRO is the best we can offer!

In addition to the outstanding features offered by the CR3.4 chassis, we now add the ever-popular Quicrun 1080 WP speed controller from HOBBYWING. Working in conjunction with a 755 brushed motor, the programmable controller really gets the absolute most out of the car.

MORE HIGHLIGHTS:

• HOBBYWING Quicrun 1080 WP speed controller with programming box - 15 programmable features in cooperation with the 2-speed gearbox and independently lockable differentials! This configuration leaves absolutely nothing to be desired!
• 755 motor for even more power! 15x5T and 8800 rpm
• 25kg metal gear servo!
• Steel driveshafts - more weight and almost indestructible!
• Complete gear set made of steel - made for eternity!
• The paint in metallic red and the cockpit with driver figure included - So the PRO is also an optical highlight!

Portal axles not only provide a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. In conventional crawlers, torque applies so much force that the vehicle jumps over the obstacle. The design of portal axles reduces the gear ratio at the wheels and virtually eliminates torque shocks from the drive. The overall reduction ratio of the axle drive is more than double that of non-portal designs to ensure smooth running.

The CR3.4 SHERPA PRO has a 2-speed steel transmission that lets you overcome difficult terrain and also get to the next obstacle quickly. Simply press a button on the remote control and change from gear ratio 1/37.1 (low speed) to 1/15.1 (high speed). 

Lock and unlock the front and rear differentials independently for maximum performance on the track - all remotely controlled with your remote and 2 built-in mini servos. Leave the differential unlocked for smooth handling at high speeds. On technically challenging trails, you can lock the front differential, rear differential, or even both to handle extreme terrain.

The drive concept - powered by HOBBYWING - includes the ever-popular QuicRun1080 WP speed controller and a 755 motor for rich torque. The built-in BEC is adjustable in voltage, 6V or 7.4 V and with 6A peak load also sufficiently dimensioned for strong servos. With the included LED programming card, a simple setting is done quickly even on the road. With the customizable parameters, there are over 80 setting options, you soon found his optimal setup for the vehicle.

A 25kg digital steering servo with metal gears and 3x 17g mini servos with 0.9kg actuating force for gear ratio and differential lock/unlock are already installed. All servos are waterproof.

The 6-channel 2.4GHz radio system gives you total control over your vehicle - whether it's the light unit, 2-speed gearbox, differential locks or setting the top speed.

CAR SPECS:

• Length: 542mm
• Width: 250mm
• Height: 240mm
• Ground clearance: 53mm
• Wheelbase: 313mm
• Weight: 2970g
• Approach angle: 60°
• Descent angle: 45°
• Steering angle max: 45.8°
• Rims: 12mm Hex Beadlock 1.9" 32x69mm
• Wheels: 43x120mm
• Shock absorber length: 90mm
• Viscosity shock absorber oil: 500cps
• Gear ratio: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote controlled
• Transmission: module 0.8/32dp - pinion 16Z / main gear 44T
• Drive system: 4WD

ELECTRONICS SPECS:

• ESC: Hobbywing QuicRun 80A brushed/waterproof with T-connector (BEC 6V@3A, 7.2V NiMh & 2S LiPo batteries can be used).
• Motor: 755 high-torque brushed motor 15x5T / 8,800 rpm
• Steering servo: 25kg metal gear, digital and waterproof
• Mini servos: 0.9kg, waterproof
• Radio system: 6-channel 2.4GHz remote control (4.8 - 12.0V LiPo capable)

INCLUDED IN DELIVERY:

• Absima CR3.4 SHERPA PRO RTR Model
• 6-channel 2.4GHz remote control system
• Decal sheet
• Instruction manual (DE/EN/FR)

REQUIRED ACCESSORIES:

• The CR3.4 Sherpa allows you to use a variety of LiPo batteries and NiMH batteries
• Different chargers - depending on the selected battery type are available
• 4x AA AA cells are needed for the remote control
• For wheel mounting a 7.0mm wheel nut wrench (wheels are not mounted when shipped)