Beier electronic terminal for switching outputs AKL-10-W, with resitors

description
The AKL-10-W connection terminal allows convenient wiring of the switching outputs for the following modules:

• Sound module USM-RC-2
• Expansion module EXM-2
• Driving controller UFR-1230

A special feature of the AKL-10-W terminal is 10 slots for series resistors to facilitate the connection of LEDs.

On the terminal, outputs 1 to 10 are available for easy connection.
The terminals 11 to 16 are connected to one another in order to allow easy distribution of the positive pole.

The connection terminal can be plugged directly into the modules via the flat ribbon cable.

The positive pole must be fed separately to the consumers. For this purpose, the terminals 11 to 16 can be used as a distributor.

10 resistors with the values ??0 Ohm (only 1 black ring), 150 Ohm (brown, green, brown, gold), 330 Ohm (orange, orange, brown, gold) and 680 are included in the delivery of the AKL-10-W Ohm (blue, gray, brown, gold).

For further information, refer to the operating instructions (PDF).

Technical specifications

• Connection terminals: USM-RC-2 and EXM-2:
• Terminals 1 to 10: Switching outputs from the sound / expansion module (negative switching)

UFR Speed ??Control:

• Terminals 1 to 8: Switching outputs from the travel controller
• Terminal 9 to 10: Positive pole of the supply voltage
• Terminals 11 to 16: connected to each other
• Connection cable: 10-pol. Flat cable, 20 cm long, can be plugged directly into the USM-RC-2, EXM-2 and UFR-1230
• Dimension: 47 x 35 x 18 mm
• Weight: 20 g

Delivery:

• AKL-10-W module
• 10 resistors each, 0 Ohm, 150 Ohm, 330 Ohm and 680 Ohm
• Operating instructions (German)