cti Thor 4 HF Titan 2 speed controller

The Thor 4 HF Titan 2 is a "cut-off controller" with brake especially for the operation of 2 parallel cti titanium cylinders.

The controller switches off the titanium cylinders automatically when the end positions are reached during retraction and extension, or when a load of approx. 6-6.5 kg is exceeded.
It is equipped with a brake which stops the cylinder immediately under high load and ensures that a "push-back" is not possible (handbrake) even when the machine is at a standstill.

The controller regulates the motor speed steplessly forward and backward and can be started again in both directions after overload cut-off.

• Operating voltage: 12 volts (10 NiMh cells or 3 lipo)
• Measurements: 15x12x4.5 mm
• Battery and motor connection: 0.25qmm silicone cable
• BEC Supply: 5 Volt

(the 5 volt supply can also be used for a receiver, but other servos should not be used as this may affect the current measurement)

Exclusive use: Operation of 2 parallel running titanium cylinders