Graupner 33579 receiver GR-18 HoTT + 3-Axle Gyro + A-Meter + Vario

199.90€ *

Prices incl. VAT plus shipping costs. Please note the minimum order value of 10 EUR.

Delivery time: will be ordered / produced for you

  • 33219
  • 33579
  • 8809370398821
With the GRAUPNER HoTT 2.4 GHz technology, the receiver has a new Hopping Telemetry Transmission... more
Product information "Graupner 33579 receiver GR-18 HoTT + 3-Axle Gyro + A-Meter + Vario"

With the GRAUPNER HoTT 2.4 GHz technology, the receiver has a new Hopping Telemetry Transmission high-frequency unit with state-of-the-art components and software. For reception, a hardware-aerial diversity system allows the best signal quality. This ensures that the return channel data are sent via the better positioned aerial. Without add-on sensors, the parameters receiver voltage and temperature, as well as signal strength are transmitted.
3-axis gyro + 3-axis acceleration sensors + Vario:

  • Stabilization of the model aircraft in unfavorable wind conditions for up to 3 axes
  • Flight behavior by natural suppression gyro proportional
  • Stabilization very good figures for clean air
  • Thanks to the 3-axis gyro is possible to fly very smoothly also models for aerobatics difficult to manage and aerobatics becomes extremely easy
  • The figures of flight can be performed considerably more clean
  • Easy setting of the allocation of the gyro
  • Setting parameters using telemetry HoTT
  • Height sensor extremely sensitive for function Vario (10 cm / s) and measurement of the height
  • Flybarless system for helicopter
  • Extremely simple and fast, set in quickly and easily using the menu telemetry transmitter HoTT
  • Basic setting performed in minutes
  • Attribution axis fast and innovative, and flexible mounting direction
  • Footprint space is limited, so easy to store and less cables
  • Extremely light (GR-24 Pro 18g / 14g GR-18)
  • 3 axis sensors particularly insensitive to vibrations of the latest generation
  • Automatic recognition of the optimization of the pirouettes of swash plate and the direction of the torque compensation tail
  • All common swashplates helicopters 90/120/135/140 degrees
  • Swashplate rotation adjustable up to 90 degrees for rod more blades
  • Standard clear and if necessary expert menu selectable
  • Sensitivity of the parameters during the flight by means of adjustable controls for number of revolutions and style, also depending on the phase of flight
  • Super fast thanks to suppression of the transfer time from the receiver to the system Flybarless
  • Feeling very direct control
  • Effective stabilization of the software for airplane models already integrated incl. Sensor Vario
  • Support telemetry of its sensors and sensor Hott Hott other suppliers
  • SUMD output for other receivers Flybarless.
  • Suitable for HV. Range of input voltage 3.6 ... 8.4 V
  • It can be programmed and used with all HoTT transmitters available so far with telemetry

 

  • Simple programming of the basic settings via telemetry.
  • The optimization of pirouettes is automatically established by the parameters and works extremely well.
  • Extreme flight stability and at the same time full fitness 3D also already with the basic settings.
  • Effect for tail and swash plate easily adjustable via the menu or via telemetry controls selectable.
  • Further options for optimizing the expert mode for the style of flight personnel and personal interests.
  • Description of the flight control for Copter:
  • With the GRAUPNER HoTT 2.4 GHz technology, the 9-channel receiver has a new high-frequency hopping telemetry transmission unit with modern components and the latest software. A hardware diversity antenna for optimal reception. Without additional sensor systems, receiver voltage and temperature parameters, as well as signal strength, are transmitted.
  • With this receiver, it is now possible to control a Multicopter without using an external Flight Control. Through the associated elimination of additional electronics and cables can thus save weight, as well as the remaining components mounted tidy.
  • Integrated Flight Control is fully configurable via the HoTT telemetry, which significantly facilitates the setting. The system sets the control commands very accurately, what gives quickly a familiar feeling of flying especially in FPV Racing.
  • On the channel 5 can switch between 2 flight-modes, which allow depending on your preference in the Attitude mode (self-neutralizing situation mode), which limits the tilt at about 50 degrees, or in the Rate mode (also called acro mode) which allows flips and acrobatic figures. Here there is no angle limitation and can be controlled freely over each axis, as well as in a helicopter model.
  • With the simple control-learn function, the learning of the control channels a breeze. Once activated display all ESCs simultaneously control and teach directly to the throttle stick.
  • Maximum performance and stability is obtained by adjustment of the ratio of the roll-sensitivity to Nick-sensitivity in unbalanced Multicopters. Similarly, a gas-dependent Gyro-limit can be continuously adjusted in order to achieve a high sensitivity but with strong drives.
  • The following Multicopter types are supported:
  • Quadro X, Quadro +, V Hexa, Hexa I, Tri L, Tri R

Other features:

  • Very direct feeling of control by eliminating the additional transmission path for Flight Control
  • Space saving, because the Flight Control and the necessary cables disappear
  • Quick and easy gyro assignment
  • SUMD output for external devices
  • Telemetry support for own HoTT sensors and other suppliers sensors
  • Can be fully programmed and operated with previously available HoTT transmitters, thus no more laptop required

Technical information

  • Number of antennas:  2
  • Aerial length [mm]:  2 x Wire 145 (Antenna 30)
  • Operating voltage neutral [V]:  (2,5) 3,6 ... 8,4
  • Width [mm]:  21
  • Frequency:  2400 ... 2483.5
  • All-up weight [g]:  14
  • Gyro:  Yes
  • Height [mm]:  14
  • Channels:  9
  • Overall length [mm]:  46
  • Modulation:  2.4 GHz FHSS
  • Range approx. [m]:  4000
  • Stabilization:  FC
  • Current consumption [mA]:  70
  • Temperature range [°C]:  - 15...+70
Related links to "Graupner 33579 receiver GR-18 HoTT + 3-Axle Gyro + A-Meter + Vario"
Read, write and discuss reviews... more
Customer evaluation for "Graupner 33579 receiver GR-18 HoTT + 3-Axle Gyro + A-Meter + Vario"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Tönsfeldt 030162 TMV control chain for construction machine AH olive Tönsfeldt 030162 TMV control chain for...
37467
15.10€ *
-6.33%
Traxxas 9760 Spring, shock (GTM) (0.155 rate) (1 pair) Traxxas 9760 Spring, shock (GTM) (0.155 rate)...
37398
Content 2 Stück (1.85€ * / 1 Stück)
3.70€ * 3.95€ * Manufacturer's RRP
-2.03%
Krick BB0906 Le Bayard Kit 1:30 from Billing Boats Krick BB0906 Le Bayard Kit 1:30 from Billing Boats
70985
77.40€ * 79.00€ * Manufacturer's RRP
Thicon 50337 Position light set with holder and LED Thicon 50337 Position light set with holder and...
34709
Content 2 Stück (23.95€ * / 1 Stück)
47.90€ *
-1.64%
Thicon 60027 1:16 drive axle front with through drive 3:1lockable, metal Thicon 60027 1:16 drive axle front with through...
33720
294.10€ * 299.00€ * Manufacturer's RRP
Thicon 50328 Headlight rectangle with LED white Thicon 50328 Headlight rectangle with LED white
34173
Content 2 Stück (17.35€ * / 1 Stück)
34.70€ *
-1.57%
Sense-Innovations ESS Dual+ Motor Sound module SE-30D1244C Sense-Innovations ESS Dual+ Motor Sound module...
34147
97.45€ * 99.00€ * Manufacturer's RRP
-5.44%
Traxxas 7817 roof skid plate X-MAXX black (needs TRX7713X) Traxxas 7817 roof skid plate X-MAXX black...
34008
11.30€ * 11.95€ * Manufacturer's RRP
-13.39%
U6819 - 1:10 Schumacher Mini Pin 1 - rear tyre 2,2", blue (2) U6819 - 1:10 Schumacher Mini Pin 1 - rear tyre...
30521
Content 2 Stück (4.85€ * / 1 Stück)
9.70€ * 11.20€ * Manufacturer's RRP
-8.68%
Tamiya 300084175 Steering knuckles M 4 x 11,5mm (5 pcs) Tamiya 300084175 Steering knuckles M 4 x 11,5mm...
32631
Content 5 Stück (0.40€ * / 1 Stück)
2.00€ * 2.19€ * Manufacturer's RRP
Leimbach Brushless-Motor with controller (0H995) 12V Leimbach Brushless-Motor with controller...
31356
187.00€ *
Pistenking RX16-OG Rotating Beacon 1:16, orange, round, screw Pistenking RX16-OG Rotating Beacon 1:16,...
31608
38.50€ *
hexagon socket screw M3x25 Niro (10 pieces) DIN912 hexagon socket screw M3x25 Niro (10 pieces) DIN912
31055
Content 10 Stück (0.15€ * / 1 Stück)
1.50€ *
Viewed