Krick 67074 Speed Controller Seaking V3 180A

Speed Controller Seaking 180A V3

Water-cooled speed controller for ship models with brushless motor with a maximum continuous current of 180A.

Features

• Automatic detection of the number of cells (manual setting possible) for LiPo
• Water-cooled electronics for maximum long-term resilience
• 2 operating modes: forward only / forward-backward with reduced power
• The control range for the motor can be adapted to all common transmitter types.

Seaking V3 Brushless ESC series

The Seaking V3 controller series has been designed for use in boats. All regulators are water-cooled and have generously dimensioned connection nipples for the silicone hose. The Seaking series is characterized by reliable technology in a small size. These controllers are designed exclusively for the control of brushless motors. LiPo batteries are used as the energy source. The number of cells is automatically recognized.
Thanks to the use of high-quality SMD components, the internal resistance of the controller is particularly low. The high clock frequency gives the Seaking V3 controllers a high-resolution and sensitive control behavior. All controllers have temperature and overcurrent protection. If water gets into the model, the controls are watertight. And of course the entire series is equipped with effective start-up protection if the throttle stick on the transmitter is not in neutral when switched on.

The parameters are set either via the transmitter or, more conveniently, with the aid of the LED programming card, item no. 67069

The following parameters can be programmed:

• Operating mode (only forwards / forwards-backwards with reduced power)
• Number of LiPo cells (auto / manual selection)
• cut-off voltage for LiPo (2.8V / 3.0V / 3.2V / 3.4V)
• Timing (0 ° / 3.75 ° / 7.50 ° / 11.25 ° / 15.00 ° 18.75 ° / 22.50 ° / 26.25 °)

Overall, the Seaking V3 series impresses with its easy handling and high level of reliability in practice. The high-quality silicone cables in flexible design underline the high quality of the brushless controller.

Technical specifications

• Type Seaking V3 180A
• Continuous current 180A
• Max. Current 1080A
• BEC power supply switch / 6V / 5A
• Number of battery cells 6-18 Z. NiMH / 2-6 Z. LiPo
• Connection to the receiver Universal servo cable JR compatible
• Connection water cooling Ø 5.4mm
• Dimensions 72x48x36.6mm
• Weight 207 g