Krick rb108-02 Transverse Thrusters 16/19 x 154 mm

Transverse thrusters from Raboesch are characterized by high quality materials and workmanship. The transverse thruster can be installed either standing or lying. By using O-rings in the housing cover and G-rings in the drive, the transverse thruster is 100% waterproof. It is driven by a 2-bladed paddle wheel, which sucks the water into the jet pipe and on the opposite side very effectively pushes it out again with a relatively high pressure. The construction is very stable and maintenance free. The pump housing and the jet pipes are made of impact-resistant ABS. The transverse thrusters rb108-01 to rb108-05 are controlled via a stepless speed controller for clockwise and counterclockwise rotation.

Specifications Bow Thruster 108-02

• Beam diameter inside 16 mm
• Steel pipe diameter outside 19 mm
• Total width max. 154 mm
• Total height about 66 mm
• Total length approx. 53 mm
• Weight approx. 105 g

• Motor dimensions without shaft 43x28 ??mm
• Motor shaft 2,3x12 mm
• Rated voltage 6V
• Voltage range 6 - 7.2 V
• Idling speed 17000 rpm (7.2 V)
• Power consumption idle 0.50 A
• Blocking current 20 A
• Efficiency 78%

For detailed dimensions see Figure 2 above.

• A 22 mm
• B 66 mm
• C 11 mm
• d 16 mm
• D 19 mm
• E 31 mm
• F 40 mm