Wedico 2350 Lighting system MFL-A for semi-trailers / trailers with IR 7

Very compact lighting system with infrared receiver.

The trailer lighting system MFL-A is suitable for all semi-trailers and trailers in the 1:14 and 1:16 scale. The MFL no .: 2288-W must be installed in the tractor!
With the MFL-A, the light functions of the MFL are received via infrared signal and transferred to the corresponding light source.
The MFL-A requires its own power supply and can be operated with LiPo, LiIo and NiMH batteries from 7.2-13.5V.

The scope of delivery includes 3mm light bulbs that fit all WEDICO models.
But LEDs can also be connected.

Since the light board is only 45x23mm in size, it fits practically invisible from the outside in every semi-trailer / trailer model.

Functions:

8 functions of MFL truck control transmitted with IR:

6 light functions:

• Left turn signal max.100mA
• Right turn signal max.100mA
• Rear light max.100mA
• Reversing light max.100mA
• Rear fog light max.100mA
• Brake light max.100mA

Light functions are operated with 6V and are protected by the 500mA fuse

2 switching functions with IR transmitted from MFL truck control:

• Function 1 max 1A
• Function 2 max.1A

Switching functions are short-circuit proof with 1A each.

Special function SF1 / SF2
Here, 2 consumers with max. 1A power, such as lamps, can be switched on / off.
But the WEDICO additional modules can also:

• MFL-U pole reversal board for motors up to 30A no .: 2354-W
• MFL-S servo board for controlling a servo no .: 2356-W

be used!

Dimensions:

• Length: 45mm, width: 23mm, height: 15mm, IR cable: 700mm
• Battery connection: AMP plug
• Voltage: 7.2-13.5V, LiPo, LiIo, NiMH

Scope of delivery:

MFL-A lighting system circuit board, IR receiver, 6V light bulb, main switch, assembly material, assembly instructions