Top seller
No results were found for the filter!
NEW
Product number: 38263
Temperature sensor for connection to RM12 or RM6+ receivers For monitoring the hydraulic oil temperature up to 120 degrees Is plugged in instead of the “Binden” jumper Also takes over the function of the Binden jumper Measured...
7.50€ *
Delivery time: will be ordered / produced for you
Product number: 38201
2.4 GHz receiver with 6 servo channels monitoring of battery voltage is possible without additional equipment supply voltage: 4,8V to 7,4V battery monitoring for NiCd / NiMH 6 or 10 cells, LiPo / LiFePo 2 to 4 cells operation with two...
95.20€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Product number: 38099
Extends the receiver RM12 to 16 channels With diagnostics/status LEDs for each output LEDs can be switched off Outputs can be switched off on a timed basis Powered through the RM12 An additional BEC is recommended for many or powerful...
29.50€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Product number: 37986
2.4 GHz receiver with 12 servo channels monitoring of battery voltage is possible without additional equipment supply voltage: 4,8V to 7,4V battery monitoring for NiCd / NiMH 6 or 10 cells, LiPo / LiFePo 2 to 4 cells Supports up to two...
145.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Product number: 33791
RC radio tray for HS12/HS16 in grey kit with all parts included (some additional tools necessary) no gluing necessary tray is tightly screwed to the radio brackets can be retracted for better storage hand rest with foam rubber...
89.90€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Product number: 50165
2.4 GHz receiver with 4 servo outputs telemetry (battery voltage) per se: no extra equipment needed note: multiprop/switch decoders of Robbe and Graupner brands are not supported supply voltage: 4,8 to 7,4 V battery monitoring: NiCd /...
79.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Product number: 50166
2.4 GHz receiver with 6 servo outputs telemetry (battery voltage) per se: no extra equipment needed note: multiprop/switch decoders of Robbe and Graupner brands are not supported supply voltage: 4,8 to 7,4 V battery monitoring: NiCd /...
95.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Product number: 33400
Radio for Servonaut Zwo4 system Stick functions: 3 levels with 4 channels each Softkey functions: 3 levels with 6 controls or 12 keys respectively Receiver channels without multiswitch: 16 Channels with multiswitch in the model: 14+2x8...
995.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Product number: 33390
Extends the receiver RX9 to 16 channels seperate BEC supply is needed to power the servos connected to the R+7 module the mounted included 10cm connection cable allows flexible placement of the module dimensions: module 52 x 19 x 9 mm³,...
47.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Product number: 33391
Radio for Servonaut Zwo4 system Stick functions: 3 levels with 4 channels each Softkey functions: 3 levels with 6 controls or 12 keys respectively Receiver channels without multiswitch: 16 Channels with multiswitch in the model: 14+2x8...
899.00€ *
Delivery time: will be ordered / produced for you
Product number: 33395
Radio for Servonaut Zwo4 system Stick functions: 3 levels with 4 channels each Softkey functions: 3 levels with 6 controls or 12 keys respectively Receiver channels without multiswitch: 16 Channels with multiswitch in the model: 14+2x8...
899.00€ *
Delivery time: will be ordered / produced for you
Product number: 33388
2.4 GHz receiver with 9 servo channels monitoring of battery voltage is possible without additional equipment supply voltage: 4,8V to 7,4V battery monitoring for NiCd / NiMH 6 or 10 cells, LiPo / LiFePo 2 to 4 cells supports...
138.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Viewed