Products from Der Getriebedoktor
How it started:
"What have you done there again - come here, turn around,"
This sentence I had heard about seven times that day, but I was only with my Tamiya MB1838 tractor just a little off-road driving, because that was just a little more interesting. AWD in a Tamiya tractor has been absolutely new at that time.
This day was to be the cradle of doc gear. In October 2006, doc gear was officially registered.
One year later we have already supplied customers in 24 countries.
And then it became:
In the meantime, more than 8,500 customers have given us their trust. Today, doc gear is the well known partner for all ambitious model makers round the world, from beginners to professionals.
We support our clients in implementing their ideas and also help you to solve your problems. And should your wishes exceed your own implementation possibilities, we also realize these desired models for you.
But of course we can also support you by designing and manufacturing special parts and offer the possibility of coaching - so you have the opportunity to familiarize yourself here with us under guidance in new topics for you.
2006 foundation
2009 first fair presence
2010 Increase of the machinery
2011 Relaunch of the online shop, from now on Xaran 5.0
2011 Start as Leimbach distributor worlwide
2012 Start of our own CNC production
2013 Extension and relocation to Bad Bramstedt
2013 first alignment of a Tamiya Fighter Cup
2016 Expansion and renewal of the IT infrastructure
2017 Start of our own 3D printing production
2017 Start as Grumalu agency for Germany and Scandinavia
2018 Relaunch of the online shop, now Shopware-based
"What have you done there again - come here, turn around,"
This sentence I had heard about seven times that day, but I was only with my Tamiya MB1838 tractor just a little off-road driving, because that was just a little more interesting. AWD in a Tamiya tractor has been absolutely new at that time.
This day was to be the cradle of doc gear. In October 2006, doc gear was officially registered.
One year later we have already supplied customers in 24 countries.
And then it became:
In the meantime, more than 8,500 customers have given us their trust. Today, doc gear is the well known partner for all ambitious model makers round the world, from beginners to professionals.
We support our clients in implementing their ideas and also help you to solve your problems. And should your wishes exceed your own implementation possibilities, we also realize these desired models for you.
But of course we can also support you by designing and manufacturing special parts and offer the possibility of coaching - so you have the opportunity to familiarize yourself here with us under guidance in new topics for you.
2006 foundation
2009 first fair presence
2010 Increase of the machinery
2011 Relaunch of the online shop, from now on Xaran 5.0
2011 Start as Leimbach distributor worlwide
2012 Start of our own CNC production
2013 Extension and relocation to Bad Bramstedt
2013 first alignment of a Tamiya Fighter Cup
2016 Expansion and renewal of the IT infrastructure
2017 Start of our own 3D printing production
2017 Start as Grumalu agency for Germany and Scandinavia
2018 Relaunch of the online shop, now Shopware-based
No results were found for the filter!
ball bearing set for Tamiya 8x4x4 Product number: 37712
ball bearing set for Tamiya 8x4x4 contains: 32x 11x5x4 2x 12x6x4 2x 8x5x2.5
44.50€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
spacer for fenders Product number: 41081
spacer for Tamiya double fenders specification: length: 10mm outer diameter: 8mm inner diameter: 3mm material: PLA HAT
0.60€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
additonal ball bearings set Tamiya To Truck Product number: 33984
This set replaces the metal bearings in the Tamiya kit 300056362 with ball bearings. Content: 26x 31009 4x 31010 4x 31134 6x 31139
49.50€ *
Delivery time: will be ordered / produced for you
DGD caboin mount rear Tamiya Actros Product number: 41068
This cab closure can be used instead of the standard closure. Above all, this closure can also be used when the transmission, for example, by four-wheel drive, is set back a bit.
32.50€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
DGD servo saver for DT-03 Product number: 41092
This servo saver is used instead of the angled standard servo saver. Broken servo savers are a thing of the past.
12.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
TLT axle with with uninterrupted drive, cable... Product number: 20568
We offer a converted Tamiya TLT axle with uninterrupted drive, a switchable differential lock and high quality stearing cardans. We will deliver the converted axle with the needed equipment to head for.
219.95€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
DGD pendulum for Carson 2-axle tipper trailer Product number: 41088
pendulum für Carson 2-axle tipper trailer. The pendulum can be fixed at the existing holes in the frame. If you use our axles 31288 and the axle mounts 40255, you can still use the existing standard rims and tyres. Width between the...
135.50€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Bohrschablone Motoranschluss Product number: 41083
If you want to convert your Wedico transmission from the use of Bühlermotoren to standard 500 engines, this is the right solution for you. Instead of the motor you screw the drill template to the gearbox. Then you drill the two new holes...
9.95€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
cabin mount Tamiya Arocs, front Product number: 41065
With this cab mount, you can lift the cabin of the Tamiya Arocs up instead of tilting it forward. These parts are simply used instead of the hinges contained in the kit.
18.50€ *
Delivery time: will be ordered / produced for you
drawbar for DGD Dolly II Product number: 41034
This drawbar for wood trailer is designed for our Dolly II and can be used together with the Carson coupling.
10.99€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
CAD engineering Product number: 90001
We are engineering for you 3D CAD models, using ZW3D. The price is based on one hour of engineering. Minimum are 15 minutes.
95.00€ *
Delivery time: will be ordered / produced for you
Drawing creation as a 3D model Product number: 33163
Do you need design documentation to further develop your model? We help! We create design drawings for you with the CAD software ZW3D. We can supply the finished models as 2D or 3D drawings in all common formats. Just contact us.
50.00€ *
Delivery time: will be ordered / produced for you
Viewed