Pistenking TRU-AL-Rampe ramp drive for Goldhofer

With this drive set, the ramps can be operated remotely on the Goldhofer semitrailer by Veroma / Carson!
Our drive set is mounted on the model and controls the ramps with a geared motor. The upper and lower end positions are secured with an end switch!
The limit switches are already wired in a one-stage manner. Only the cables on the motor have to be soldered! A battery voltage of 6-8.4 V is provided for operation. If the operation is compulsorily with a higher voltage (e.g., 12V), you can use a cruise control and operate it with only about 60% "bounce".
IRAM: Operation is also possible with our IRAM. There is no customized version for this. Since the limit switches are already fixed in this case, they do not have to be separately connected to the IRAM! This has the advantage that only the motor cable must be routed from the IRAM to the ramp drive.

Note: It may be that their steering servo next to the drive motor for the ramps no more space. We will offer a new assembly option in a few weeks!

Delivery:

• gearmotor
• Worm gearboxes (screw mounted on motor)
• Limit switch, pre-assembled and wired
• new, continuous shaft for ramps
• Side cover caps for shaft
• new ramp holder, suitable for new shaft (can be moved laterally!)
• Gear housing base plate (acting as drilling template)
• Gear case cover
• Instructions, screws, cables