cti Thor 4 HF Titan 1 speed controller

The Thor 4 HF Titan 1 is a "cut-off" with brake specifically for the operation of the cti titanium cylinders.

The regulator automatically switches off the Titanium cylinder when the end positions are reached during retraction and extension, or when a load of approx. 6-6.5 kg is exceeded.
It is equipped with a brake which stops the cylinder immediately under high load and ensures that a "push-back" is not possible (handbrake) even when the machine is at a standstill.

The controller regulates the motor speed steplessly forward and backward and can be started again in both directions after overload cut-off.

• Operating voltage: 12 volts (10 NiMh cells or 3 lipo)
• Measurements: 15x12x4.5 mm
• Battery and motor connection: 0.25qmm silicone cable
• BEC Supply: 5 Volt

(the 5 volt supply can also be used for a receiver, but other servos should not be used as this may affect the current measurement)

Use: exclusively for the operation of a titanium cylinder