Absima 12025 1:10 EP Crawler CR3.4eco "BRONCO Style" blue RTR

Features

The CR3.4eco Crawler in Bronco Style is of interest to anyone who likes purist crawling or wants to get started in this fascinating hobby on a low budget.

This vehicle is a "downgrade" of our original "CR3.4 RTR chassis, which is probably one of the best on the market and has been since 2020!
The quality of the parts installed is of course the same as ist fully equipped brothers. The mounting points for special equipment such as the differential locks or 2-speed gearboxes would also theoretically be available.

As standard, the vehicle comes with a 550 32T brushed high torque motor and a HobbyWing 40A speed controller. You can use the "jumper" on the speed controller to determine whether the vehicle is powered by a 7.2V NiMH battery or a 2S or 3S (low profile) LiPo battery!

Portal axles not only offer a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. In conventional crawlers, the torque creates so much force that the vehicle jumps over the obstacle. The design of the portal axles reduces the gear ratio at the wheels and virtually eliminates the torque surges of the drive. The overall reduction ratio of the axle gear is more than twice as high as non-portal versions to ensure smooth running.

  The steering shock absorber absorbs most hard hits so that the 9kg MG steering servo and the servo arm are protected. Drive shafts made of hardened steel and a steering angle of 45.8° offer the best options for any terrain. In addition, there are 2.2" tires which not only look stylish, but also have a lot of grip thanks to the super soft tires.

Our CR4S-V2 remote control system with 2.4GHz and 4 channels completes the overall package.

Tec Specs

• 2.4GHz 4-channel remote control CR4S-V2
• 9kg steering servo with metal gear
• 40A Hobbywing speed controller (3S LiPo capable) with T-plug
• 32T 550 brushed motor
• Portal axes
• Aluminum 4-link suspension
• Steel drive shafts front and rear
• Heavy duty cardan shafts front and rear
• Steering angle max: 45.8°
• Rims: 2.2" with 12mm hexagonal mount
• Tires: Supersoft 40x115mm
• Shock absorber length: 90mm
• Damper oil viscosity: 500cps
• Gear: Module 0.8/32dp; Pinion 18T / main gear 44T
• Approach angle: 60°
• Departure angle: 45°
• Length 542mm
• Width: 250mm
• Height: 240mm
• Ground clearance: 53mm
• Wheelbase: 313mm
• Weight: 2390g

scope of delivery

• CR3.4eco crawler including remote control
• operation manual
• Sticker sheet

Required accessories

• 7.2V NiMH battery, 2S/7.4V LiPo battery or 3S/11.1V LiPo battery
• Charger suitable for the battery type
• 4 pieces of AA Mignon batteries or TX LiPo battery for the remote control